Futurebus
Sign in to saveAlso known as IEEE 896
Futurebus (IEEE 896) is a computer bus standard designed to replace all local bus connections in a computer, including the CPU, plug-in cards, and even some LAN links between machines. The project started in 1979 and was completed in 1987, but then went through a redesign until 1994. It has seen little real-world use, although custom implementations are still designed.
Wikidata facts
Show 1 more fact
- inception
- 1987-00-00
Sources (3)
via Wikidata · CC0
~2 min read
Article
5 sectionsContents
- History
- See also
- References
- Further reading
- External links
Futurebus (IEEE 896) is a computer bus standard designed to replace all local bus connections in a computer, including the CPU, plug-in cards, and even some LAN links between machines. The project started in 1979 and was completed in 1987, but then went through a redesign until 1994. It has seen little real-world use, although custom implementations are still designed.
== History == In the late 1970s, VMEbus was faster than the parts plugged into it. It can connect a CPU and RAM to VME on separate cards to build a computer. However, as the speed of the CPUs and RAM rapidly increased, Futurebus created a successor to VMEbus using asynchronous links. Though the ability to have several cards in the system as "masters", allowing Futurebus to build multiprocessor machines, required some form of "distributed arbitration" to allow the various cards to gain access to the bus at any point, as opposed to VME, which put a single master in slot 0 with overall control.